Menu
header photo

Avoiding DIY Plumbing Disasters

February 3, 2016

The level of difficulty of plumbing is not that high especially when we know which parts are having a problem. And don’t try to hide it, you go by instinct at times, too. Although sometimes we achieve the success of having fixed our plumbing issues, it also doesn’t take that much before everything turns into a chaos. It definitely saves a lot of money if we do the fixing ourselves, but remember that there’s fixing it yourself and there’s fixing it the right way.

So before you put your gears on and do your own plumbing, here are the things that you have to know to avoid DIY plumbing disasters.

Be aware of where the shut-offs valves are.

Regardless of how small the job is, it is a must that you know where the shut off valves are. You may have just one but if you don’t know where it’s located and how to turn it off, you could be in big mess. Most homes have a good system that was carefully thought of. This could mean that there is a shutoff valve for each bathroom. The number one rule is to always locate and be familiar with your shut off valves.

Valves are mostly located in the basement, but there are some that are located just behind some access panels. You can test if you got the correct valve off by flushing the toilet and turning the faucets on.

The most important valve location to know is the location of the main house shut off valve. This valve can usually be found where your water line enters your home. Be sure to also know the quickest way to get to each valve. You’ll never know when you will need to shut one off.

Learn how to sweat a copper pipe.

The ability to sweat a copper pipe is the foundation of today’s plumbing. All you need is a flux, a torch, a solder and some pipes.

Sweating a copper pipe is an easy task. Simply clean the ends of the pipes, evenly coat them with the flux, heat it up using the torch then apply the solder. The joints you’ll be making might not be as neat as what the plumbers do, but it’ll be as functional. And, it always gets easier and better as you keep on trying. Knowing this does not always have to mean that you will be piping the entire house, but it’s always safe to know it for some minor fixes such as plumbing.

Know your home’s entire plumbing system.

You should never begin a do-it-yourself plumbing project without understanding your home’s plumbing system. Learning plumbing’s basic concepts always saves you a whole lot of trouble when you do your own plumbing. Basically, when you know the function of your vent pipe, the amount of pitch that the waste pipe needs, and the size of the drain lines, then you can easily map your own plumbing. You would also want to know the location of the waste lines and where it ends, and which walls have pipes in them. If you have more information about your house and your entire system, it will be much easier for you to do your plumbing and avert any future plumbing disasters.

Keep a complete toolbox handy.

Any homeowner who likes doing do-it-yourself projects should always have a complete toolbox ready for just about anything. Plumbing requires some tools and having not enough tools will delay your fix and may cause more damage if you’ve already started with the project. It’s even frustrating to go to a hardware store while in the middle of the project. So before you even start putting your work attire on, make sure that you have all the tools you need to fix the problem.

DIY plumbing projects are always great. Just be sure to get ready with whatever knowledge and skills you need to make sure you get the project done and get it done right. You can avert plumbing disasters by making sure you have the right mindset, the right tools, and everything else in between to make your project a success – yes that includes getting the right advice from the right people. If you need more tips for your own plumbing projects, contact your trusted plumbing contractors now!

Go Back

Comment